11 kV.
Ready for your
substation.
Factory-terminated tails.
A simpler connection on site.
The New Macey Bolted Adaptor arrives with HVPW cable and adaptor-side terminations already fitted. Less preparation for your team. An easier connection to your substation.
More done here.
Less to do there.
The cable, earth braid and constant-force springs are fitted at the factory. Your crew can focus on connecting the tails to the substation, with the adaptor-side preparation already complete.
Reduce on-site termination work.
Prepared for
the connection.
Three 3M 5600 Series stress-control tubes are fitted as part of the factory-terminated assembly, bringing cable preparation and stress control together before the adaptor reaches your site.
One less preparation step for your team.
Built for
the hard yards.
Increased casting wall thickness gives the aluminium housing greater rigidity and resistance to impact. A substantial body for demanding mining and industrial applications.
A more resilient housing for tough environments.
Held in place.
Sealed within.
Hard-set resin supports the pins against push-back. Insulation bonded to the earth sleeve helps resist moisture ingress around the insulation assembly.
Secure pin support and improved moisture sealing.
Your installation.
Your arrangement.
Multifunctional earth studs accommodate different termination methods. Talk to New Macey about the earthing arrangement and end terminations your application needs.
Flexibility at the connection point.
Loading the adaptor…
The model represents the assembly; selected cable length is shown in the part details.
One configuration.
One clear code.
Choose your cable size, length and pilot circuit.
We’ll put the right catalogue reference in your hands.
Make it yours.
Aluminium adaptor with factory-terminated HVPW cable.
11 kV · 800 A · Three phase.
Browse all 20 catalogue part numbers ＋
| Part number | Cable | Length | Pilot circuit | Inspect configuration |
|---|
No matching part numbers. Try a shorter code or another cable size.
Part references from the New Macey 11 kV catalogue. New Macey will confirm current configuration and availability when quoting.
Prepared here.
Supported here.
Factory-fitted cable
HVPW cable, stress-control tubes, earth braid and constant-force springs fitted to the assembly.
Cover and gasket included
A dust cover and sealing gasket supplied with the adaptor kit.
Made in Australia
Manufactured by New Macey, with technical advice for your installation.
The finer details.
11 kV, 800 A aluminium bolted adaptor.
Factory-terminated cable for your substation connection.
| Rated voltage | 11,000 V (11 kV) |
|---|---|
| Rated current | 800 A |
| Housing material | Aluminium |
| Cable | Platinum HVPW 120 mm² or 240 mm² |
| Cable lengths | 1.2, 1.8, 2.0, 2.5 or 3.0 m |
| Conductor connection | Crimp |
| Supply configuration | Factory-terminated cable tails |
| Stress control | 3M 5600 Series |
| Finished weight | 27 kg |
| Manufactured in | Australia |
The details.
When you need them.
Choose your PDF, then enter your name, work email and phone number to download.
